![]() ![]() Run your terminal emulator with the following serial parametersįor Tera Term, choose the serial port, then go to Setup – Serial Port, set the speed to 38400, then click “New setting”.įor Putty, select Serial, change the Speed to 38400, and then click “Open”.Įnter the username and password, then you can manage the switch. Launch and Configure the Terminal Emulator. #Mac ethernet console installNote: If you use the Micro-USB cable, we recommend “ Tera Term”, which you can download and install from the official website. Go to the official website to download the installer and follow the prompts to install the terminal emulator. If you still cannot enter the BootUtil after several attempts, you may get a USB-to-RS232 cable.įor Windows computers, you need to install a terminal emulator, such as Putty, Tera Term. 4 hour battery life and comes with Many many features, including auto-discovery, full control over baud rate and other settings, detailed management webpage (and built in web terminal). Provides RS232 Serial connection over Bluetooth (Low Energy or 2.1), WIFI or Wired Ethernet in a single unit. We recommend an RJ45 Console cable or USB-to-RS232 cable, as it might be more difficult to enter the BootUtil menu with a Micro-USB cable. After clicking Open Network Preferences, select your Ethernet connection on the left hand side of the box. Airconsole Pro is the Bluetooth / Wifi to Serial and Ethernet adaptors for use with iPhone, iPad, PC, Mac and Android. Note: If you need to enter the BootUtil menu to reset the switch or recover the password, please refer to FAQ 3146. Then for Windows computers, click here to download and install the TP-Link USB Console Driver then continue. You can also choose a Micro-USB cable that supports data transfer to connect your computer to the switch. You need to install the RS232 driver for the cable, which is provided by your cable vendor. If you only have USB ports on your computer, you can get a USB-to-RS232 cable. If your computer has a serial port (COM), connect it to the console port (RJ45) of the switch, with the RJ45 console cable. You can use the console cable to connect your PC to the console port of the TP-Link JetStream managed Switch and then manage the switch with the CLI.įollow the steps below to manage the switch via the console port: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |